- Tube swaging machine with high frequency heating - -BO-114
Summary
Shrink tube machine is used to process metal round tube into conical tube. It is easy to operate and can be used quickly by anyone. This machine has the characteristics of stable performance, the work piece forming time is short, the machining surface is smooth, the work piece has no scars. It is easy to change the mould of taper tube shrinkable machine, and different shapes of metal pipes can be processed with the corresponding mould to meet the needs of different industries. Suitable for furniture, lighting, bicycle, small pipe grouting taper molding processing products.
Features
When the cone tube is put on the head by hand, the vibration cannot be felt, and the machine has good stability;
2. Four-piece molding cone mold, the material is Cr12MoV material, computer engraving, fine wear-resistant and durable;
3. After vacuum heat treatment, the mold is much harder than the peers, so it will last one to two years than the peers;
4. The machine adopts thick cast iron head design, low noise, longlife;
5. the work piece forming time is short 5- 15s, high efficiency! Low noise processing smooth surface, work piece without scars.
Main Parameters
|
No |
Item |
BO-114*400 |
Noted |
|
1 |
Max processing outer diameter |
φ108mm |
|
|
2 |
Thickness |
φ76*150mm long tip can be processed to a thickness of 8.0mm φ 76*360mm-Long tip can be processed to a thickness of 5.0mm. The φ108*200mm long tip can be processed to a thickness of 4.0mm. |
Heat shrinking |
|
3 |
Forming length |
380 mm |
|
|
4 |
Time |
7-30 s |
|
|
5 |
Motor power |
15 kw |
|
|
6 |
Spindle speed |
248 r/m |
|
|
7 |
weight |
3000 kg |
|
|
8 |
Dimensions |
3300* 1900* 1700mm |
|
|
9 |
High frequency heating |
HD-100 380V |
Hot Tags: ground nail production line, China ground nail production line manufacturers, suppliers, factory
